Taps, toilets & basinsin Cardiff & South Wales

Wall-hung, back-to-wall, pedestal. Chrome, brushed, matte black, brass. Supplied or client specified, fitted level and leak-tested.

The fittings on the wall are what your guests touch. We fit them like we expect them to last twenty years. Toilets bolted to the floor or wall hung off a properly tested concealed cistern. Basins set level on a pedestal or hung off a vanity unit with the waste centred. Taps tightened in the order the manufacturer specifies, washers seated, no over-tightening that splits the inner thread.

We fit chrome, brushed nickel, brushed brass, matte black, polished gold. Whatever finish the room is asking for. We are equally happy fitting client-supplied premium taps and supplying mid-range trade-stocked taps that will last on a budget.

Single fittings, full vanity rebuilds, en-suite finishing, refurbishment of period basins, replacement of cracked toilets, traditional cisterns with chain pulls and matching valves.

How a taps, toilets & basins job runs.

Every job is run the same way: same team, same trades, same approach. The notes below are how we think about taps, toilets & basins specifically.

i.

Wall-hung toilets

Concealed cistern, frame fixed back to a structural wall, pan flush to the tile. The clean look the rest of the room deserves.

ii.

Pedestal & vanity basins

Bolts straight, waste centred, taps tightened in order. Waste run gets the right fall.

iii.

Premium taps

Brushed brass, matte black, chrome, gold. Client-supplied or supplied through us. Pressure-tested before the silicone goes on.

iv.

Cisterns & valves

Concealed and exposed, traditional pull chains, low-flow dual flush, pneumatic concealed buttons.

A few taps, toilets & basins jobs.

Pulled from the last few months across Cardiff, Newport and the boroughs. Hover for a one-line note on the project.

Ready to plan a taps, toilets & basins?

Call Simon for an initial chat, or send a couple of photos of the space and Sycamore will come back with a quote the same week.

Frequently asked.

Can you fit a wall-hung toilet on a stud wall?
Only if there is a structural support frame. We can install one as part of a strip-out and replaster.
Do brushed brass taps tarnish?
PVD-coated brass is hard wearing and will not. Solid brass with no PVD will patina, which some clients want.
Do you supply or fit only?
Both. Most clients buy their own taps and have us fit. We supply mid-range options when budget is a factor.
Can you re-route waste pipework?
Yes. Routine in renovations. We agree the run on site before any chase or boxing.

Let's talk about the space.

A few photos and a sketch of the room is usually enough for a first quote. For anything structural or tricky, we come and look.

Office Landline02921 202 001
Mobile07832 288 991
Email